how to replace the iPhone 13 outer screen

If the iPhone 13 outer screen is damaged, replacing the outer glass can keep the original OLED inner screen and save costs.

However, you need to have good manual skills. If it fails, the entire screen has to be replaced.

Now we will tell you how to replace the iPhone 13 outer screen, please check carefully

First, remove all screws and metal shields. Remove the screen. 

Then protect your face ID and camera.

Take-off sensing flex cable. (Be careful not to break the cable)

Put OCA adhesive on the screen to protect it

The screen is fiirmly attached to the separation pad. 

Start separating the OLED along the bottom layer of the glass with cutting wire.

Remove OCA adhesive with electric glue removing tool.

clear away residue OCA adhesive with N-Hexane.

Through our observation, we found that the touch panel of iphone 13 is under the polarizer, which is beneficial to screen refurbishment, as the touch panel is less likely to get damaged during operation. 

Put the glass with oca in position.  laminating and debubbling by machine.

Next, we install the sensing flex cable.

iPhone 13 is much easier to replace the outer screen than iPhone 12. This means less risk.

Now clean the inside of the iPhone. Install the screen. Install the tail screw.

Power on, test, touch is no problem, face id can also be used.

If you are interested in mobile phone lcd screens or mobile phone parts, here is a wholesaler of mobile phone lcd parts in China: Taoyuan.They have been focusing on mobile phone parts for many years, with rich experience, cheap prices and the best quality. If you are a repairer and want to purchase mobile phone lcd touch screen from China, or a distributor or wholesaler, Taoyuan can provide you with a reasonable solution.